Southeast Asia’s Manufacturing Shift: New Factories Need Stev Steel Systems.

2026-11-20 10:02:00 admin 2

Focusing on "Southeast Asia's Manufacturing Shift: New Factories Need Stev Steel Systems.", this article combines common practices and acceptance requirements in actual projects, explaining items from plan confirmation, material entry, on-site construction to delivery and maintenance, and attaching checklists and key parameters that can be used directly.

1. Deepening design of special-shaped ceiling

Arc, wavy and multi-layer sliding ceilings need to be lofted in 3D before being converted into keel positioning maps. The radius of the surface, the thickness of the plate and the spacing of the keel directly affect the molding effect, cannot be bent at will based on field experience alone .

II. Structure and materials

styling typeRecommended boardkeel treatmentPrecautions
Small radius arcSheet double layerEncryption keel, slottingAvoid monolayer fractures
wavyBendable platelofting in radiansSeam arc
Multi-level downgradeConventional gypsum boardConvert keelCheck elevation
Curved surfaces and light slotsMoisture-proof gypsum boardlocal reinforcementreserved for maintenance

III. Construction Control

Install the base skeleton and check the arc first, and then layer the sealing plate. The curved seams should be staggered with the keel, and the screws should be fixed from the middle to both sides to avoid cracking due to stress concentration.

IV. Acceptance List

  • Check the lofting drawings and site radians.
  • Check the keel spacing and reinforcement measures.
  • Check the seams, light slots and closures.
  • Keep hidden acceptance records.

The success or failure of the special-shaped ceiling lies in the lofting and skeleton. The early deepening is accurate, and the forming is smooth.

Technical Guidance on Integrated Ceiling and Wall Solutions

Ceiling and partition systems form the structural and functional framework of interior spaces. This section provides technical guidance on integrated ceiling and wall solutions used in commercial, industrial, and institutional buildings.

The content covers:

  • Suspended Ceiling Systems

  • Concealed Ceiling Structures

  • Exposed Grid Systems

  • Light Steel Keel Partition Walls

Materials discussed include:

  • Gypsum Board

  • Calcium Silicate Board

  • Cement Board

  • Mineral Fiber Board

  • Metal Ceiling Panels

  • Composite Boards

This section focuses on system compatibility, structural layout, load performance, dimensional stability, and long-term reliability. It is intended to support practical system selection for offices, retail spaces, factories, hospitals, and large-scale public buildings.

Home
Products
News
Contact