This article focuses on the theme of "Inspection Checklist for Industrial Building Insulation Systems.", starting from the four links of material selection, system construction, on-site construction and acceptance, and sorting out the key points, parameters and inspection items that can be directly used in the project for reference by the design, procurement and construction teams.

1. Hospitals and medical spaces

Clinic rooms, wards and corridors need to control noise, facilitate cleaning and meet fire protection requirements. Moisture-proof boards should be selected for humid areas. Equipment belts and access openings should be easy to maintain. The surface of the board should be resistant to wiping. Cleaning and disinfection methods must be confirmed in advance.

2. Schools and educational buildings

Classrooms focus on controlling reverberation and speech intelligibility, while corridors and multi-purpose halls must take into account both sound absorption and impact resistance. In high-traffic areas, keels and fixed points should be strengthened to reduce collision deformation, and panels that are scrub-resistant and partially replaceable should be used.

3. Office and commercial space

Open office areas are suitable for medium-high sound-absorbing ceilings, and commercial atriums and public corridors can be combined with metal ceilings or molding panels. The layout of lamps, air vents and sprinklers should be coordinated with the board module, and the mechanical and electrical points should try to avoid decorative seams.

4. Industrial and transportation facilities

Wind pressure, vibration, moisture and cleanliness should be considered in factories, garages and traffic spaces. Structural review should be carried out in large-span areas, independent lifting points and maintenance channels should be set up in equipment concentration areas, and conditions for later maintenance should be reserved.

5. Scenario selection list

• Check whether the fire protection, acoustics, moisture resistance and environmental protection indicators meet the usage requirements.
• Check the board specifications, edge shape and surface scrub resistance.
• Confirm that the keels, lifting points and accessories meet the load requirements.
• Choose a system based on maintenance cycles and replacement methods.

The goal of the application plan is not to select the most expensive materials, but to achieve a balance between space performance, construction costs and maintenance methods.